WHMIS - Labels

Important Information

Canada has aligned the Workplace Hazardous Materials Information System (WHMIS) with the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). This document discusses the WHMIS supplier requirements as regulated by federal legislation – the Hazardous Products Act (HPA) and the Hazardous Products Regulations (HPR). This document reflects the Hazardous Products Regulations requirements as of December 15, 2022. Health Canada is the government body responsible for the overall WHMIS supplier-related laws. Note that WHMIS is also regulated in the workplace by the provinces, territories and federal governments (for federally regulated workplaces) under their occupational health and safety legislation. While these jurisdictions based their WHMIS regulations on the common model, small variations between jurisdictions may exist. Suppliers and employers must use and follow the WHMIS requirements for labels and safety data sheets (SDSs) for hazardous products sold, distributed, or imported into Canada. This document discusses the WHMIS supplier and workplace labelling requirements. Please refer to the following other OSH Answers documents for information on:

• context WHMIS – General
• context WHMIS – Pictograms
• context WHMIS – Hazard Classes and Categories
• context WHMIS – Safety Data Sheets (SDSs)
• context WHMIS – Education and Training
• context WHMIS – WHMIS Program
• context WHMIS – Glossary
• context WHMIS – Confidential Business Information (CBI)
• context WHMIS – Variances
• context WHMIS – Laboratories
• context WHMIS - Information for Suppliers and Importers
• context WHMIS - Legislation

What products require a WHMIS label?

• context In Canada, WHMIS legislation requires that products used in the workplace that meet the criteria to be classified as hazardous products be labelled.
• context Labels are the first alert to the user about the major hazards associated with that product, and outline the basic precautions or safety steps that should be taken.

Who is responsible for labelling?

• context In most cases, suppliers are responsible for labelling the hazardous products they provide to customers. Note: Labels must be affixed to, printed or written on, or attached to the hazardous product or the container and remain legible. Providing a compliant WHMIS label along with the shipping papers would not be considered to be in compliance (that is, this scenario would not meet the requirements of the Hazardous Products Regulations).
• context Employers are responsible for making sure that hazardous products that come into the workplace are labelled and for preparing and applying a workplace label when appropriate.

Are there different types of labels?

Yes. There are two main types of WHMIS labels: supplier labels and workplace labels. Suppliers of hazardous products are required to apply a label that meets the requirements of the Hazardous Products Regulations. If the hazardous product is always used in the container with the supplier label, no other label is required. A workplace label is required when: There are two situations when a workplace label is not necessary. When a hazardous product is: If the product is not used right away or if more than one person will be in control of the product, a full workplace label is required. Note that a company may have specific rules about labelling containers that are above or exceed the WHMIS requirements. NOTE that requirements for workplace labels are regulated by your local provincial or territorial jurisdiction. Check with your jurisdiction for more information.

• context a hazardous product is produced (made) at the workplace and used in that workplace,
• context a hazardous product is decanted (e.g., transferred or poured) into another container, or
• context a supplier label becomes lost or illegible (unreadable).
• context poured into a container and it is going to be used immediately, or
• context "under the control of the person who decanted it". For example, when the person who poured the product into another container will be the only person who will use it, and the product will be used during one shift, a full workplace label may not be required. However, the container must still be identified with the product identifier (name).

What information is required on a supplier label?

Supplier labels must be in both official languages of Canada (English and French). They may be bilingual (as one label), or available as two labels (one each in English and French). Providing a supplier label in just English or French would not meet the requirements of the Hazardous Products Regulations. The supplier label must include the following information: Supplemental label information – Some supplemental label information is required based on the classification of the product. For example, the label for a mixture containing ingredients with unknown toxicity in amounts higher than or equal to 1% must include a statement indicating the percent of the ingredient or ingredients with unknown toxicity. Labels may also include supplementary information about precautionary actions, hazards not yet included in the GHS, physical state, or route of exposure. This information must not contradict or detract from the standardized information. * Initial supplier identifier – There are two exceptions to this requirement:

• context Product identifier – the brand name, chemical name, common name, generic name or trade name of the hazardous product.
• context Initial supplier identifier – the name, address and telephone number of either the Canadian manufacturer or the Canadian importer*.
• context Pictogram(s) – hazard symbol within a red "square set on one of its points".
• context Signal word – a word used to alert the reader to a potential hazard and to indicate the severity of the hazard.
• context Hazard statement(s) – standardized phrases which describe the nature of the hazard posed by a hazardous product.
• context Precautionary statement(s) – standardized phrases that describe measures to be taken to minimize or prevent adverse effects resulting from exposure to a hazardous product or resulting from improper handling or storage of a hazardous product.
• context In a situation where a hazardous product is being sold by a distributor, the distributor may replace the name, address, and telephone number of the initial supplier with their own contact information.
• context In a situation where an importer imports a hazardous product for use in their own workplace in Canada (that is, the importer is not selling the hazardous product), the importer may retain the name, address, and telephone number of the foreign supplier on the labelinstead of replacing it with their own contact information.

What is a signal word?

• context A signal word is a prompt that alerts you about the degree or level of hazard of the product. There are only two signal words used: "Danger" or "Warning". "Danger" is used for high-risk hazards, while "Warning" is used for less severe hazards. If a signal word is assigned to a hazard class and category, it must be shown on the label and listed in section 2 (Hazards Identification) of the safety data sheet (SDS).
• context Some hazard classes or categories do not have a signal word assigned to them.

What is a precautionary statement?

Precautionary statements provide advice on how to minimize or prevent adverse effects resulting from exposure to a hazardous product or from improper storage or handling of a hazardous product. These statements can include instructions about storage, handling, first aid, personal protective equipment, and emergency measures. Like the hazard statements, the wording of precautionary statements is standardized and harmonized. There are five types of precautionary statements: Examples of precautionary statements are: Precautionary statements will be consistent with the degree of the hazard associated with the product.

• context General.
• context Prevention.
• context Response (including first aid).
• context Storage.
• context Disposal.
• context Keep the container tightly closed.
• context Wear protective gloves/protective clothing/eye protection/face protection.
• context If exposed or concerned: Get medical advice/attention.
• context Fight fire remotely due to the risk of explosion.
• context Protect from sunlight.

How do suppliers use the GHS guidance materials when creating labels and SDSs?

The use of the slash (/) or the dots (...) are intended as instructions to the supplier to help them prepare the label and SDS. For example, the guidance material from GHS lists the following precautionary statement "Wear protective gloves/protective clothing/eye protection/face protection." The slash (/) means the supplier is to specify the appropriate type of equipment based on their knowledge of the product and how it is used. So, for example, this statement could appear as: Or Or Another example is "Do not subject to grinding/shock/friction/…". In this case, the supplier is to specify the applicable rough handling circumstances to avoid (grinding, shock and/or friction), and the dots (...) mean they are to consider other types of rough handling that should be mentioned.

• context Wear protective gloves and eye protection.
• context Wear protective gloves.
• context Wear protective gloves, protective clothing, eye protection, and face protection.

When does a supplier label have to be updated?

• context A label is required to be updated when the supplier becomes aware of any "significant new data". According to the regulation, the definition of significant new data is:
• context "New data regarding the hazard presented by a hazardous product that changes its classification in a category or subcategory of a hazard class, or result in its classification in another hazard class, or change the ways to protect against the hazard presented by the hazardous product." (Source: Hazardous Products Regulations, Section 5.12 (1))
• context Labels are required to be updated within 180 days of the supplier being aware of the new information. If you purchase a product within this 180-day time period, the supplier must provide a document that provides the changes to the label that are required and the date the data became available.
• context If employers receive information about new significant data from a supplier, the employer must use this information to update all of the relevant supplier labels.

What information is required on a workplace label?

In general, a workplace label requires the following information: Employers must make sure the correct labels are used. Workplace label requirements fall under your provincial or territorial jurisdiction, or under the Canada Labour Code if you work in a federally regulated workplace. Confirm the exact requirements with your jurisdiction.

• context Product name (matching the SDS product name).
• context Safe handling precautions may include pictograms or other supplier label information.
• context A reference to the SDS (if available).

Are there any other types of labels allowed?

In specific cases, yes. Products can also be identified witha mark, sign, stamp, sticker, seal, ticket, tag, or wrapper. It can be attached, imprinted, stencilled, or embossed on the hazardous product or its container. Workers must be trained to identify these alternative systems if they are used in the workplace. Under WHMIS, Variations on the supplier label apply for specific situations such as: A fold-out or accordion-style label is allowed if there is not enough space on the product to provide a label that meets the legibility requirements of the Hazardous Products Regulations. Note that:

• context Bulk shipments – A labelling exemption exists for products sold without packaging.
• context 100 mL or less – Exempt only from the requirement to have precautionary or hazard statements on the label.
• context 3mL or less – Where the label will interfere with the normal use of the product, the product would be required to have a label that is durable and legible for transport and storage but may be removable during use.
• context the required pictogram(s), signal word and hazard statement(s) must be grouped together on the label,
• context the label must be clearly and prominently displayed on a surface that is visible under normal conditions of use, and
• context the label must, under normal conditions of transport and use, remain affixed to, printed or written on, or attached to the product or its container and remain legible.