// Forklifts

Forklift Trucks - Fork Safety

How often should the forks of forklift trucks be inspected? Under normal operating conditions, forks should be inspected daily and every six months.

How often should the forks of forklift trucks be inspected?

context Under normal operating conditions, forks should be inspected daily and every six months.
context Daily: Operators should make visual inspection of forks during the pre-start-up check, giving special attention to permanent distortions, cracks, and excessive oil or water on the blades.
context Six months: A thorough inspection of forks should be done every six months, preferably by a trained individual, to check for any deformations, failures or damage that might lead to unsafe conditions. Forks may need inspections more often, depending on the use of the equipment.
context Check with your jurisdiction for any requirements regarding frequency of checks and maintenance. A list of Canadian government departments responsible for health and safety can be found here.

What are some important points of a periodical (six months) fork inspection?

context Check fork blades and shanks for wear. Forks are constantly subjected to abrasion by concrete floors, steel shelving, etc. This abrasion can reduce the thickness of a fork until it cannot lift loads up to the designed capacity. Pay close attention to the heel.
context Check for distortion. Fork blades and shanks can be bent out of shape. Depending on distortion, some forks can be straightened. The fork manufacturer is best qualified to correct this. Your local forklift supplier can make the arrangements.
context Check if the fork tips are at different heights. The difference in the height of the fork tips should not exceed 3% of the length of the blade.
context Check for cracks in the heel or hanger. Cracks may appear on forks where attachments are welded on or in the inside radius of the bend area. Periodic inspection using a magnetic particle or dye penetrant test can detect cracks. Approved grinding methods may grind out and polish these blemishes, depending on the depth of the crack. Contact your forklift supplier or the manufacturer for additional information.
context Check the fork angle. Forks should be manufactured with an angle of 90° (unless it is a fork designed for a special purpose). The angle of the fork should not deviate more than 3° from the original specification.
context Replace, when necessary, with good-quality forks. When ordering or reordering forks, make sure you are getting high-quality forks that will do your lifting jobs safely. Insist on forged forks or ones with an upset heel.
context unusual lifting conditions
context spark-free areas
context high-heat furnace areas
context special object lifting
context Use the proper forks. Custom-designed forks may be needed for:
context Contact your forklift supplier for assistance.

What are some things you should not do to forklift forks?

requirement Do not overload the forks. Operators should be aware of the capacity of the forklift and the capacity of the forks. Overloading may bend and weaken forks.
requirement Do not repair your own forks. No one but the fork manufacturer should undertake the repair of forks.
requirement Do not modify forks without consulting with your forklift supplier.
requirement Do not use for anything other than their specified purpose.