// Garages

Cleaning with Compressed Air

Is it a good idea to use compressed air to blow dirt off clothing or work surfaces? No.

Is it a good idea to use compressed air to blow dirt off clothing or work surfaces?

Is cleaning with compressed air allowed by law?

What are the hazards of using compressed air?

What should I use instead of compressed air for cleaning purposes?

Where compressed air is allowed for cleaning, how can I do it safely?

A "quiet" nozzle (i.e. one with low noise emission) should be selected. The nozzle pressure must remain below 10 psi (69 or 70 kPa). Note: Maximum air pressure limits are legislated by British Columbia (70 kPa/10 psig), New Brunswick (69 kPa),North West Territories (68.9 kPa/10 psi), Nunavut (68.9 kPa/10 psi), Yukon (69 kPa/10 psi), and where permitted under federal regulations (69 kPa/10 psi). In Quebec, compressed air used to clean equipment or machines must be less than 200 kPa, unless inside a specially designed enclosure. Use effective guarding methods that prevent a chip or particle (of any size) from being blown into the eyes or unbroken skin of the operator or other workers nearby. You may also use barriers, baffles, or screens to protect other workers near the operator if there is a risk of exposure. In addition, air guns should also be used with some local exhaust ventilation or facilities to control the generation of airborne particulates. When compressed air cleaning is unavoidable, hazards can be reduced by making adjustments to the air gun such as: air guns equipped with injection exhausts and particle collection bags. When using compressed air to clean combustible dusts, potential ignition sources in the dust removal area must be controlled. All sources of ignition must be eliminated, and all machinery and equipment must be de-energized or rated for safe use in atmospheres containing combustible dusts. Personal protection equipment (PPE) must be worn to protect the worker's body, especially the eyes, against particles and dust under pressure. Respiratory protection should also be used if there is a risk that hazardous particulate matter will be inhaled. Examples: The Nova Scotia regulation states: 101. (2) Where compressed air is used to clean a surface or person, an employer shall ensure that the device that is used to deliver the air is (a) commercially manufactured and approved in the manufacturer's specifications for the purpose of cleaning a surface or person with compressed air; or (b) certified by an engineer as adequate for the purpose of cleaning a surface or person with compressed air. Occupational Safety General Regulations N.S. Reg. 44/99 Section 101(2) Ontario does not specify a pressure limit but does state: 66. A compressed air or other compressed gas blowing device shall not be used for blowing dust or other substances, (a) from clothing worn by a worker except where the device limits increase in pressure when the nozzle is blocked; or (b) in such a manner as to endanger the safety of any worker. Industrial Establishments R.R.O. 1990, Reg. 851 Section 66