// Lasers

Lasers - Health Care

What is a laser? The term "laser" is an acronym that stands for "Light Amplification by Stimulated Emission of Radiation".

eye protection hand protection respiratory protection

What is a laser?

context The term "laser" is an acronym that stands for "Light Amplification by Stimulated Emission of Radiation". Laser light is a form of non-ionizing radiation. Laser equipment produces and amplifies light that has unique properties that cannot be produced any other way. The light that it produces is monochromatic - it is composed of one single colour at a specific wavelength. Laser radiation can be generated in different parts of the spectrum - ultraviolet (UV), visible light, and infrared (IR).
context The color of laser light is usually described in terms of the wavelength of the laser radiation. The most common unit used for the wavelength of laser is a nanometer (nm - one billionth of a metre). Light from other sources is made up of combination of colours at various wavelengths.
context Another property of lasers is they are coherent light sources. This feature means that lasers produce monochromatic light (i.e., with a single or selected wavelength) in which the light “particles” or photons all travel in the same direction. This directionality allows laser beams to be very focused (collimated) so they do not fan out like the light beam of a flashlight. Since the light beam can be contained in a very narrow beam, it has a high radiant power per unit area. These properties enable laser devices to produce powerful laser beams that can cut metal. In health care, lasers are used for cutting, sealing and surgical procedures.

What are examples of lasers that are used in health care facilities?

A wide variety of lasers are used in health care facilities. The type of laser depends on the purpose of use. Lasers can be used as knives or probes and for imaging techniques. For example, laser knives can make cuts that do not bleed. They can be used to smooth skin wrinkles or remove skin moles, cysts, tattoos, spider veins, and so forth. Some commonly used lasers are given in the following table. Table 1: Commonly Used Lasers in Health Care *Neodymium-doped Yttrium Aluminum Garnet

context Type | Radiation Type/Wavelength in Nanometres (nm) | Examples of Application
context Carbon dioxide (gas laser) | Infrared/ 10,600 | Surgery: Incision and excision by vaporization
context Argon (gas laser) | Visible, blue/ 488 | Sealing blood vessels in retina, plastic surgery
context Argon (gas laser) | Visible, green/ 514 | Sealing blood vessels in retina, plastic surgery
context Krypton KPT 532 (gas laser) | Visible, green/ 532 | Surgery: Cutting, coagulation, and vaporization of tissues
context Nd:YAG* (continuous wave - solid state laser) | Infrared/ 1,064 | General surgery
context Nd:YAG* (Q-switched - solid state laser) | Visible, red/ 632 | Ophthalmology: cutting tissues
context Helium-Neon (gas laser) | Visible, red/ 632 | Alignment: for aiming invisible beams
context Ruby (solid state laser) | Visible, red/ 694 | Plastic surgery, Dermatology: Destroying tissues
context Rhodamine 6G Dye (Tunable - dye laser) | Visible/ 570-650 | Treatment of malignant tissues; red (630 nm) commonly used

What are the types of hazards found when using lasers?

There are two types of laser hazards: the laser beam hazards and the non-beam hazards. Laser beam hazards include eye and skin burns which are due to laser beam shining on a person's body. Non-beam hazards are associated with the laser equipment or the hazardous substances released from the laser equipment, and fumes emitted from materials exposed to laser beams, including laser-plumes produced during surgical procedures. Sources of laser hazards include:

general Unintentional eye exposure during alignment
physical Misaligned laser beam
general Lack of eye protection
general Equipment malfunction
general Improper handling of high voltage systems
general Use of unfamiliar equipment
general Improper restoration of equipment following service

What safe work practices should be used?

There should be a laser safety program in place and all staff who must work with or near the laser unit should receive: For example, the CSA Standard Z386-20 "Safe Use of Lasers in Health Care" specifies that facilities using lasers shall have a laser safety officer (LSO) and a laser safety committee (LSC) to perform risk assessments, and to ensure that laser safety policies and procedures are developed, implemented and maintained. The CSA Standard Z305.13-13 (R2020) "Plume scavenging in surgical, diagnostic, therapeutic, and aesthetic settings" also requires that:

administrative Training on proper procedures for the safe use of equipment.
requirement Instructions about how to keep equipment in good working order.
administrative Instruction and training to protect patients and clients from exposure.
requirement Education about possible health and safety hazards to all workers.
administrative The facility has procedures and policies that are created and kept up-to-date that address the various hazards that may be present.
administrative Procedures should also address purchasing, installation, testing, use, servicing, and maintenance.
administrative All disposable plume scavenging system (PSS) equipment including filters, capture devices, and hoses be considered biohazardous, and that these items should be handled according to the manufacturer’s instructions or the facility’s policy.

Are there standards that can be used to develop a safe work practice program?

Yes, standards such as the following are available to develop a safe work practice program: Note: Always check with your local jurisdiction to determine if your workplace must follow a specific standard.

requirement The CSA Standard CSA-Z94.3.1-16: Guideline for selection, use, and care of eye and face protectors
requirement CSA-Z386:20: Safe Use of Lasers in Health Care
requirement CSA Standard Z305.13-13 (R2020) Plume scavenging in surgical, diagnostic, therapeutic, and aesthetic settings
requirement The American National Standards Institute (ANSI) Standard Z136.1-2014: Safe Use of Lasers
requirement ANSI Z136.3-2018: Safe Use of Lasers in Health Care
requirement ANSI Z136.7-2020: Testing and Labeling of Laser Protective Equipment

What are the eye hazards when using lasers?

physical The eye is the most vulnerable to injury from a laser beam. The potential for injury depends on the power and wavelength of the laser beam (light). Intense bright visible light makes us blink as a reflex reaction. This closing of the eye provides some degree of protection. However, visible laser light can be so intense that it can do damage faster than a blink of an eye. The invisible infrared laser beam, such as carbon dioxide (CO2) laser beam, does not produce a bright light that would cause the blinking reflex or the pupil to constrict and, therefore, chances of injury are greater compared to visible light beam of equal intensity.
physical The location of the damage depends on the optical nature of the laser beam. Lasers in the visible light and near infrared range focus on retina. Therefore the injuries produced are retinal burns. The infrared radiation is absorbed in the cornea and may cause corneal damage and loss of vision.

What kind of eye protection should be used?

engineering Every piece of laser equipment has built-in engineering controls such as protective housing, fail-safe interlocks, master switches, beam stops and attenuators (e.g., light absorbers) to prevent accidental exposure. However, eye protection is needed while using Class 3B or Class 4 type lasers to prevent harmful exposure from reflected and scattered laser beams.
ppe The ability of eye wear to filter the laser beam is expressed in terms of optical density. Optical density, type of laser, and visibility required are all important factors in the selection of protective eye wear. Protective eye wear may not provide the same degree of protection for infrared as for visible light and ultraviolet laser beams. Goggles with side shields are preferred because they provide protection against back reflection and side entrance of stray laser beams.

Selection of Protective Eye Wear

context Consult appropriate standards such as CSA Standard Z94.3.1-16: Guideline for selection, use, and care of eye and face protectors or American National Standards Institute / International Safety Equipment Association (ANSI/ISEA) Standard Z87.1-2020 for guidance on selecting protective eye wear for your specific application.
context Plastic versus glass lenses: Protective eye glasses typically are available with plastic lenses. Plastic lenses are light weight and can be molded into comfortable shapes. However, care is needed because they can be affected by heat, and/or UV radiation which can darken the lens or decrease its ability to absorb laser energy.
context Alignment eye wear: This type of eye wear is used for low power visible laser beams. Alignment eye wear should not be worn during the operation of high power or invisible laser beams. Instead, safety eye wear that provides adequate protection should be worn.

What are skin hazards and what protective clothing is needed?

physical The potential for skin damage depends on the type of laser, power of the laser beam, and the duration of exposure. The type of damage may range from localized reddening to charring and deep incision.
ergonomic Protective clothing (gown, cap, mask), gloves, and safety eye wear may be required for working near a laser. Consult manufacturer's operating procedures and check with the laser safety officer to determine the specific needs for personal protective equipment and clothing.

What are the sources of fire hazard from lasers?

chemical A fire can be started when laser beam or reflection of the beam strikes a combustible material such as rubber, plastic, human tissues, paper products, skin treated with acetone and alcohol-based preparations, human hair, and intestinal gases. Fire hazards are of particular concern in oxygen-rich atmospheres when oxygen or when nitrous oxide is being used.

What are preventative measures for the fire hazard?

physical Train personnel to develop awareness about fire hazards and response procedures in case of laser fires.
physical Make sure that hot tip of the laser does not touch combustible items.
physical Maintain precise control of laser beam.
physical Eliminate surfaces which can reflect laser beam.
physical During surgery the laser beam should be in the stand-by position at all times except when the handpiece is in the hand of the surgeon.
chemical Make sure that skin preparation solutions are fully vaporised before covering the area with surgical drapes.
safety Follow standard procedures in the event of fire or explosion.

What are some non-beam hazards associated with lasers?

Electrical hazards

Many lasers use high voltage and high current electrical power. The danger of electrical shock or electrocution arises when an untrained or unauthorized person tries to perform maintenance work without following the proper safety procedures. ANSI Standard Z136.3-2018 outlines electrical safety procedures applicable to laser equipment. Electrical safety requirements include the following:

physical Use proper grounding for metal parts of the laser equipment.
physical Label laser equipment with electrical rating, frequency and watts.
general Prevent explosions in high pressure arc lamps and filament lamps.
safety Avoid contact with electrical components, including capacitors which can contain an electrical charge even after the power is turned off.
safety Ensure that combustible components of electrical circuit are short circuit tested.
physical Make sure that there is no electromagnetic interference between the laser equipment and other electrical equipment.

What are some elements of a laser safety program?

The ANSI Standard Z136.1 recommends a laser safety program for workplaces using class 3B or class 4 lasers. Following are the essential components of a laser safety program:

Administrative

context A written laser safety policy.
context Posting of warning signs.
context Designation of the authority and responsibility for the evaluation and control of laser hazards to a laser safety officer.
context Management of incidents including reporting, investigation, analysis and remedial action.
context Training and education of personnel involved in the use and maintenance of lasers.
context Formation of laser safety committee.
context Establishment of a quality assurance program including regular inspection of the laser equipment.
context Presence of another person (buddy system) during maintenance work to provide first aid and to call for assistance in case of an incident.
context Periodic eye examinations (consult ANSI Standard Z136.3).

Engineering Controls

engineering Local exhaust ventilation.
requirement Fail safe methods (e.g., automatic shutters to protect the user's eyes from reflected laser beam).
requirement Lock and key to prevent unauthorized activation of laser.
requirement Elimination of reflective surfaces from the room.
requirement Window covers (if necessary) to absorb scattered laser beam.
engineering Built-in access panel interlocks and automatic shutting to protect maintenance personnel.
engineering Safety latches or interlocks to prevent unauthorized access to controlled laser area.

Personal Protection

requirement Appropriate eye protection.
ppe Adequate respirators.
ppe Protective clothing and gloves.
ppe Personal protection program including training in the maintenance and use of personal protective equipment.

What are some of the duties of a laser safety officer?

In workplaces where a class 3B or Class 4 laser is used, a laser safety officer (LSO) must be on staff. The laser safety officer must do the following to ensure safe use of lasers.

What are some elements in a laser safety training program?

context Explain what lasers are and how they work.
context Laser hazard classification and its relation to potential hazards and need for control measures.
context Laser beam hazards (eye and skin hazards).
context Potential hazards arising as a result of the use of laser beam.
context Non-beam hazards from laser equipment.

What is an example of a laser safety checklist?

Room

requirement Warning signs.
requirement Window and door covers (non-transparent, non-reflecting material).
requirement Fire extinguishers.
requirement Storage for gas tanks.
requirement Secure locked designated place for the laser key.
requirement Designated place for accessories.

Personal Protection

requirement Documented personal protection program.
ppe Training for use and maintenance of personal protective equipment.

Laser Equipment

requirement Electrical outlets.
requirement Electrical power cords.
requirement Cooling water pressure.
requirement Cooling water temperature.
requirement Maintenance up-to-date.
requirement Laser log up-to-date.

Smoke Evacuator

requirement Filter change date record.
requirement Responsibility for filter change assigned.
requirement Valid safety sticker.
requirement Laser operation.
administrative Documented authorization procedure.
administrative Written operating procedures.
requirement Emergency contact telephone numbers of persons responsible for laser safety.