What is the most likely kind of injury resulting from manual materials handling?
- context It is probably fair to say that every worker who lifts or does other manual handling tasks is at some risk for musculoskeletal injury. A low back injury is the most likely kind of injury. The complete elimination of this hazard is not realistic. However, organizations can reduce the number and the severity of manual handling-related injuries by using safe work practices.
How can we prevent back injury resulting from manual materials handling?
To prevent occupational back injuries, it is essential to identify the factors that make the worker more susceptible to injury or that directly contribute to injury.
A successful approach combines knowledge of ergonomics, engineering, the work environment, and human capabilities and limitations. The following aspects should be considered:
The design or redesign of jobs involving materials handling should be approached in the following stages:
- requirement organization of workflow
- requirement job design and redesign (including the work environment)
- administrative pre-placement procedures, where necessary
- administrative education and training
- elimination eliminate the need for heavy manual materials handling
- requirement decrease the demands
- requirement reduce stressful body movements
- requirement pace of work and rest breaks
- requirement improve environmental conditions
How do you eliminate the need for heavy manual materials handling?
- context Consider using powered or mechanical handling systems if eliminating the tasks completely is not possible. Mechanical aids lower the risk of back injury by reducing the worker's physical effort required to handle heavy objects.
- context Manual handling such as lifting and carrying can be easier and safer if mechanized by using lift tables, conveyors, yokes, or trucks. Gravity dumps and chutes can help in disposing of materials. However, it is essential that the worker is properly educated and trained in the safe use of the available equipment.
How can we decrease the demands?
Where possible, use mechanical aids. The next step is to decrease the manual material handling demands. There are several ways to achieve this:
- requirement Plan the workflow. Often poor planning of the workflow results in repeated handling of the same object (e.g., when articles are temporarily stored in one place, moved to another, stored again, and moved again).
- requirement Decrease the weight of handled objects to acceptable limits.
- requirement Reduce the weight by assigning two people to lift the load or by splitting the load into two or more containers. Using light containers may also decrease the weight of the load versus other containers.
- administrative Change the type of movement required. Lowering objects causes less strain than lifting them. Pulling objects is easier than carrying them. Pushing is less demanding than pulling.
- requirement Change work area layouts. Reducing the horizontal and vertical distances of lifting substantially lowers handling demands. Reducing the travel distances for carrying, pushing or pulling also decreases work demands.
- requirement Assign more time for repetitive handling tasks. More time reduces the frequency of handling and allows for more work/rest periods.
- requirement Alternate heavy tasks with lighter ones to reduce the build-up of fatigue.
How can we reduce stressful body movements when handling materials?
It is important that tasks are designed to allow the worker to do tasks without excessive reaching, bending, and twisting. These body motions are particularly dangerous and can cause back injury even when not combined with handling loads.
- requirement Provide all materials at a work level that is adjusted to the worker's body size.
- elimination Eliminate deep shelves to avoid bending.
- requirement Ensure sufficient space for the entire body to turn.
- requirement Locate objects within easy reach.
- requirement Ensure that there is clear and easy access to the load.
- requirement Use handles or have a good grip whenever possible.
- requirement Use slings and hooks to move loads that do not have handles.
- requirement Balance the contents of containers.
- requirement Use rigid containers.
- requirement Change the shape of the load so the load can be handled close to the body.
Why is the pace of work important?
- context Pace of work, particularly when externally imposed, may significantly contribute to the worker's discomfort, and consequently to the onset of musculoskeletal injuries. Generally speaking, pressure to work at a certain pace creates the mental need to work in a hurry. This perception, in turn, creates tension not only in the mind but also in the body. Tense muscles are much more prone to injury.
- context For example, the pace of work is related to the frequency of a lift. Lifting equations, such as the Revised NIOSH Lifting Equation, use this factor as one of the ways to determine the impact of a lift. Assessments include not just how many lifts are preformed, but the amount of time there is to rest between lifts.
- context It would be ideal if workers could work at their own pace and have some freedom to take a rest break when they start feeling the effects of fatigue. However, this option might be impractical. It seems reasonable to incorporate two additional 15-minute breaks, mid-morning and mid-afternoon, in addition to the 30-minute lunch break. If that schedule is still not feasible, shorter but more frequent breaks can work as well.
- context It is also important that people new to a particular job or task be given time to adjust by allowing them more breaks.
How can we improve the environment to reduce the risk of injury due to material handling?
The design of the work environment is an important element for back injury prevention.
When the material handling tasks are done outdoors, the temperature conditions including the humidex (in hot weather) or wind-chill factor (in cold weather) have to be monitored very closely.
More details about working and doing manual material handling activities in hot and cold environments are available in CCOHS publications Groundskeepers Safety Guide, Working in Hot Environments, and Cold Weather Worker's Safety Guide.
- requirement Illuminate the work area at a level of 200 lux.
- requirement Use task lights or other additional light sources to improve the ability to see clearly where the material handling requires fine visual discrimination.
- requirement Use angular lighting and colour contrast to improve depth perception. This lighting technique helps the worker when the material handling involves climbing stairs or moving through passageways.
- requirement Reduce tasks when the temperature exceeds 28°C.
- requirement Restrict to the minimum possible when wind-chill drops below -25°C.
- requirement Wear properly designed clothing to decrease heat absorption by the body and to increase evaporation. This factor is particularly important for people required to work in a high-temperature environment.
- ppe Encourage using proper protective clothing for people working in a cold environment. This equipment is essential to protect the worker from hypothermia and to preserve the dexterity needed for safe work.
How effective is pre-placement screening in back injury prevention?
- ppe The objective of pre-placement screening is to determine if an individual is likely to be injured by the activities of their work. There is limited research available to help determine the effectiveness of these measures. In general, it appears that the screening is more accurate when job specific tasks can be included or evaluated.
How can education and training be used to help prevent back injuries?
When combined with work design, education and training are an important element in the prevention of injuries. Part of this education and training also includes showing the worker how to actively contribute to the prevention of injuries. A program should:
Instruction on how to lift "properly" can be a controversial issue. While there are many guidelines, there is no single correct way to perform a lift. Because of this fact, on-site, task-specific training is essential. Some general lifting techniques include:
It is also important that workers:
Finally, there is an aspect of training that cannot be overlooked if training is to be part of an effective prevention program.
Workers should be educated that muscles, tendons and ligaments are not prepared to meet the physical stress of handling tasks when they are not "warmed up." Pulls, tears or cramps are more likely when stretched or contracted suddenly under such conditions. These injuries can lead to more serious and permanent injuries if physically stressful work is continued. Warming up and mental readiness for physically demanding tasks are important for any kind of material handling, but particularly for occasional tasks where the worker is not accustomed to handling loads.
- requirement Make the worker aware of the hazards of manual material handling.
- requirement Demonstrate ways to reduce unnecessary stress.
- administrative Train workers in appropriate material handling techniques
- requirement Plan the lift– remove obstacles from the path that will be travelled.
- requirement Prepare to lift by warming up the muscles.
- requirement Stand close to the load, facing the way you intend to move.
- requirement Use a wide stance to gain balance.
- requirement Ensure a good grip on the load.
- requirement Maintain the natural curve in the back (helps the mechanical forces to be distributed more evenly over the spine).
- requirement Tighten abdominal muscles.
- requirement Bend the knees (removes forces from the spine).
- requirement Initiate the lift with body weight.
- requirement Lift the load close to the body.
- requirement Lift smoothly without jerking.
- requirement Keep the load close to the body, where possible.
- requirement Breathe through the lift.
- requirement Do not tense muscles.
- requirement Do not twist or side-bend while lifting.
- requirement Do not perform the lift if you are not certain that you can handle the load safely.
- requirement Take advantage of rest periods to relax tired muscles; this rest prevents fatigue from building up.
- administrative Report discomforts experienced during work; reporting will help to identify hazards and correct working conditions.
- administrative Know how to recognize a manual material handling hazard and report concerns.